{"title":"S15 200SX \/ Silvia Parts","description":"\u003cp\u003ePurpose-built S15 200SX and Silvia parts: knuckles and roll centre correction, suspension arms, steering angle kits and chassis reinforcement, engineered in-house and proven in drift and circuit competition.\u003c\/p\u003e","products":[{"product_id":"rear-subframe-slip-in-collars","title":"Rear subframe slip-in collars","description":"\u003cp\u003eThe GKTECH rear subframe collars are used to eliminate axle tramp and to also tighten up the rear end giving more precise control of the vehicle under harsh driving conditions. \u003cbr\u003e\u003cbr\u003e - CNC Machined \u003cbr\u003e- 8 Piece Set\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695115539,"sku":"rear-cllr","price":92.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_2338.jpg?v=1675378676"},{"product_id":"3-turbo-intake-snout-to-suit-t25-t28-gt2871r-etc","title":"3\" turbo intake snout to suit T25\/T28\/GT2871r etc.","description":"\u003cp\u003eThe GKTECH billet aluminium turbo intake snout has a 3\" inlet and 2.5\" outlet to suit most 2 bolt turbos including T25, T25g, T28, GT2871r, GT3071r (with 2 bolt front housing) etc.\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695246611,"sku":"trbo-snut","price":68.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_6739_1.jpg?v=1675385381"},{"product_id":"s14-s15-200sx-under-engine-bash-plate","title":"S14 \/S15 200sx Under Engine Bash Plate","description":"\u003cp\u003eSave your sump and K frame with this under engine bash plate. This is designed with low cars in mind and will reduce the risk of damage. It will also help reduce turbulence and improve airflow.\u003c\/p\u003e\n\u003cp\u003e- 3.0mm thick aluminium \u003cbr\u003e- 100% perfect fitment \u003cbr\u003e - Fits S14 and S15 200sx\/Silvia\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695279379,"sku":"S145-bash","price":249.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/2015-10-14_15.47.45.jpg?v=1675640592"},{"product_id":"s13-180sx-r32-r33-r34-z32-eccentric-lockout-kit-hicas-equipped-cars","title":"S13\/180sx\/R32\/R33\/R34\/Z32 Eccentric lockout kit (HICAS equipped cars)","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/span\u003e \u003cspan\u003eTo suit HICAS equipped vehicles (also avaiable for non HICAS equipped vehicles).\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695770899,"sku":"s132-bolt","price":48.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_6498.jpg?v=1675657562"},{"product_id":"turbo-to-intercooler-hotpipe-snout","title":"Turbo to intercooler hotpipe snout","description":"\u003cp\u003eThe GKTECH billet aluminium turbo to intercooler hot pipe snout is 2\" and is a bolt on to most Nissan turbos including T25, T25g, T28, GT2871r, GT3071r (with 3 bolt front housing outlet). A great item if you're installing a different turbo on your car and want an easy way to get your intercooler piping to line up.\u003c\/p\u003e\n\u003cp\u003eAlso includes 6mm vacuum line fitting.\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695410451,"sku":"trbo-otlt","price":64.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_4267.jpg?v=1675392505"},{"product_id":"stainless-steel-tie-rod-end-lock-spacers","title":"Stainless Steel Tie rod end lock spacers","description":"\u003cp\u003eThese spacers slip on to the end of either standard or aftermarket tie rods and allow the tie rods to travel an additional 6mm further into the steering rack which creates more steering lock. Providing around 8-10 degrees more steering angle. Great for drift or getting out of parking spots.\u003c\/p\u003e\n\u003cp\u003e- Easy DIY installation \u003cbr\u003e- CNC machined stainless steel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a PAIR\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695541523,"sku":"niss-trod","price":15.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/niss-trod_tb.jpg?v=1675653511"},{"product_id":"adjustable-rear-traction-rods","title":"V4 - S\/R\/Z32 Adjustable Rear traction rods","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms with even more adjustment.\u003c\/p\u003e\n\u003cp\u003eRear traction rods allow adjustment of the rear multi-link suspension. They can be adjusted to eliminate bump steer and alter other rear suspension traction settings to improve suspension response.\u003c\/p\u003e\n\u003cp\u003eThe lengths on these arms are fully adjustable and with the right adjustments, you can change the position and pitch of which the suspension rotates on, along with the amount of \"anti-squat\" of the rear. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e- V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e\u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends with recessed ends for additional strength. \u003cbr\u003e\u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded.\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695574291,"sku":"rear-trtn","price":269.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_1712-nw.jpg?v=1675657839"},{"product_id":"sr20-coolant-neck-spacer","title":"SR20 coolant neck spacer","description":"\u003cp\u003eWant to install an aftermarket coolant temp sensor but don't want to cut into your radiator hose? Me either! Instead of doing that simply unbolt your factory coolant neck and install this spacer in between the neck and the head. \u003cbr\u003e\u003cbr\u003eThe spacer has the provision for a 1\/8 NPT provision or alternatively if used in conjunction with a barbed fitting this spacer could be used as the source for a coolant breather tank.\u003c\/p\u003e\n\u003cp\u003e- Lightweight T6-6061 billet aluminium construction \u003cbr\u003e - Direct bolt on\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695607059,"sku":"clnt-spcr","price":56.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/clnt-spcr1_tb.jpg?v=1675391041"},{"product_id":"s14-s15-handbrake-extenders","title":"S14\/S15 handbrake extenders","description":"\u003cp\u003eThe GKTECH handbrake extenders are a direct replacement of your standard item and give more leverage which in turn helps lock up the rear brakes. Great for drifting!\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695508755,"sku":"s145-hrse","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_5067_1.jpg?v=1675397577"},{"product_id":"aero-mirrors-s15-200sx-silvia","title":"Aero Mirrors - S15 200sx\/Silvia","description":"\u003cp\u003eThe Gktech aero mirrors are a direct replacement of the standard mirrors and can be installed within 5-10 minutes. Manufactured from high quality ABS plastic, these mirrors are ready to be installed straight from the box.\u003c\/p\u003e\n\u003cp\u003eNo need to prepare or paint.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: SOLD AS A PAIR\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695639827,"sku":"s15x-mirr","price":149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/mirror-thumb_6.jpg?v=1675640097"},{"product_id":"solid-subframe-bushes","title":"Solid rear subframe bushes","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH solid subframe bushes are a direct replacement of the standard items and ensure that movement of the subframe is kept to a minimum. \u003cbr\u003e\u003cbr\u003eThey eliminate axle tramp whilst also raising the subframe 15mm which helps to correct the roll center on lowered vehicles. \u003cbr\u003e\u003cbr\u003e - CNC Machined from 6061-T6 aluminium \u003cbr\u003e- 4 Piece Set\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eShims to suit GTR models: \u003ca href=\"https:\/\/au.gktech.com\/products\/subframe-bush-spacer-shims-set-of-4\"\u003eSubframe bush spacer shims\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695836435,"sku":"subf-risr","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_0358.jpg?v=1675379593"},{"product_id":"sr20-stainless-steel-7-layer-exhaust-manifold-gasket","title":"SR20 Stainless Steel 7 layer exhaust manifold gasket","description":"\u003cp\u003eThis multi-layer stainless steel exhaust manifold gasket is a direct replacement of the standard unit and is an upgrade from your general carbon composite manifold gaskets which are prone to blowing out.\u003c\/p\u003e\n\u003cp\u003e- Race tested and a proven performer \u003cbr\u003e - Replacement for Nissan part 14036-75F00\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695672595,"sku":"sr20-gskt","price":46.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/sr20-gskt2_tb.jpg?v=1675391304"},{"product_id":"v4-2-s14-s15-r33-caster-arms","title":"V5 - S14\/S15\/R33 high clearance caster arms","description":"\u003cp\u003eThe new V5 GKTECH Caster Arms offer the most amount of clearance available in a caster rod while now being 16mm thick AND now have on-car adjustment! \u003c\/p\u003e\n\u003cp\u003eCaster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel.\u003c\/p\u003e\n\u003cp\u003e- V5 arms now feature on-car adjustment to make alignments a breeze! \u003cbr\u003e- V5 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel.\u003cbr\u003e- V5 arms are manufactured from 4130 chromoly sheet with billet CNC machined ends and CNC machined 4130 chromoly adjusters.\u003cbr\u003e- CAD designed, FEA tested, CNC machined ends and TIG welded\u003cbr\u003e- V5 arms include offset bush spacers for even more clearance\u003cbr\u003e- Offers a total of 56mm extra wheel clearance which equates to roughly 9 degrees of additional wheel clearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eNOTE: If you require S13 Silvia\/180sx \/ R32 Skyline caster arms please refer to our other listing to suit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cstrong\u003e\u003cstrong\u003eWant to see the clearance and lock achievable with these arms? Click here:\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/www.instagram.com\/p\/Bu7TDWSnyl9\/\"\u003ehttps:\/\/www.instagram.com\/p\/Bu7TDWSnyl9\/\u003c\/a\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317695967507,"sku":"s145-cstr","price":379.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/MG_5698_8a53130d-22b2-4aae-b6f1-fb900fc109f8.jpg?v=1696309900"},{"product_id":"s14-s15-brake-master-cylinder-stopper","title":"S14\/S15 Brake Master Cylinder Stopper - RHD","description":"\u003cp\u003eThe GKTECH brake master cylinder stopper helps eliminate movement in the brake booster which causes sponginess in the brake pedal under hard driving condition\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696098579,"sku":"s145-bmcs","price":84.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/MG_5815_86930434-0793-4825-87d2-d6ad818b8ee1.jpg?v=1751364073"},{"product_id":"s14-s15-r33-r34-rear-toe-arms","title":"V4 - S14\/S15\/R33\/R34 Rear toe arms","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms. The new V4's now have even more adjustments. Rear toe arms give you the ability to adjust and tune your vehicle's rear toe.\u003c\/p\u003e\n\u003cp\u003eThe lengths on these rear toe arms are fully adjustable to your specs when doing an alignment and with the right adjustments, straight line and cornering of your vehicle will be improved. \u003cbr\u003e\u003cbr\u003e - V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends with recessed ends for additional strength. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded. \u003cbr\u003e-20 degree bend in the end of the arm to clear chassis rails on lowered vehicles\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNOTE: Will NOT suit cars with HICAS previously installed unless you use our lockout bar with clevis to suit (for this configuration use our S13 toe arms even on an S14\/S15\/R33\/R34). \u003cbr\u003e\u003cbr\u003eNOTE#2: If you require S13 Silvia, 180sx, A31 Cefiro or R32 Skyline rear toe arms please refer to our other listing to suit.\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696065811,"sku":"s145-toex","price":309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_1709-nw_1.jpg?v=1675658960"},{"product_id":"s14-s15-r33-eccentric-lockout-kit-non-hicas","title":"S14\/S15\/R33 Eccentric lockout kit (non HICAS)","description":"\u003cp\u003e\u003cspan\u003eThe GKTECH eccentric lockout kit replaces the adjustable camber and toe bolts that are prone to slipping under hard driving conditions and ensures that your wheel alignment stays where it was set.\u003c\/span\u003e \u003cspan\u003eTo suit non HICAS equipped vehicles (also available for HICAS equipped vehicles).\u003c\/span\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: If you require S13 Silvia, 180sx, R32 Skyline or A31 Cefiro etc. eccentric lockout kits please refer to our other listing to suit.\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696131347,"sku":"s145-bolt","price":76.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_6502.jpg?v=1675657866"},{"product_id":"v2-s14a-s15-eccentric-throttle-wheel","title":"V2 S14a\/S15 Eccentric throttle wheel","description":"\u003cp\u003eThe S14a\/S15 eccentric (ie. off-center) throttle wheel makes the travel of the throttle cable down low in the rev range longer and gives you more control, and makes the travel up high shorter for instant throttle response.\u003c\/p\u003e\n\u003cp\u003eGreat for drift or even general street use. Seriously, one of the best cheap mods money can buy.\u003c\/p\u003e\n\u003cp\u003e- Light weight T6-6061 billet aluminium construction \u003cbr\u003e- Direct bolt on replacement of the standard throttle wheel\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696033043,"sku":"s145-trtl","price":71.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/s145-trtl1_tb.jpg?v=1675392904"},{"product_id":"offset-caster-rod-bush-inserts","title":"Offset caster rod bush inserts","description":"\u003cp\u003eThe GKTECH Billet Aluminum offset caster rod end inserts replace the inserts that go into the rose joint of your caster rod and give around 10mm more wheel clearance by moving the caster rod over. \u003cbr\u003e\u003cbr\u003eThese are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install.\u003c\/p\u003e\n\u003cp\u003e- Machined from billet 7075-T6 aluminium and anodized for longevity.\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696590099,"sku":"cstr-endx","price":34.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/cstr-endx1_tb.jpg?v=1675652731"},{"product_id":"t28-stainless-steel-turbo-to-dump-pipe-gasket","title":"T25\/T28 stainless steel turbo to dump pipe gasket","description":"\u003cp\u003eThis stainless steel turbo to dump pipe gasket is a direct replacement of the standard unit and is an upgrade from your general carbon composite manifold gaskets which are prone to blowing out.\u003c\/p\u003e\n\u003cp\u003e- Race tested and a proven performer \u003cbr\u003e - Replacement for Nissan part 14445-79E00 and 14445-75F10\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696426259,"sku":"dump-gskt","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/2016-09-22_09.46.46_1.jpg?v=1675391538"},{"product_id":"s15-200sx-radiator-cooling-panel1","title":"S15 200SX Radiator Cooling Panel","description":"\u003cp\u003eThe GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose.\u003c\/p\u003e\n\u003cp\u003eThe air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in coolant temperatures on the track.\u003c\/p\u003e\n\u003cp\u003e- CNC laser cut 2mm aluminium plate \u003cbr\u003e- Anodized black\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696327955,"sku":"airp-s15x","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/AIRP-s15x-thmb.jpg?v=1675897005"},{"product_id":"v4-s-r-z32-rear-camber-arms-ruca-s","title":"V4 - S\/R\/Z32 Rear Camber Arms (RUCA's)","description":"\u003cp\u003eThe new V4 GKTECH suspension arms are an even further improved version of our popular V3 Chromoly arms. The new V4's now have even more driveshaft clearance, and even more camber adjustment.\u003c\/p\u003e\n\u003cp\u003eThrough a unique one-of-a-kind design, our camber arms have the MOST amount of adjustment compared to any others on the market. Allowing for more negative adjustment than ever before.\u003c\/p\u003e\n\u003cp\u003eWhen you lower your car negative camber is introduced. This reduces the contact patch of your tyres and thus available traction. Our rear camber arms are a direct replacement of the OEM arm and will correct this issue.\u003c\/p\u003e\n\u003cp\u003eThese camber arms allow for approximately -5\/+7 degrees of camber adjustment. - V4 arms feature high quality 5\/8\" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. \u003cbr\u003e\u003cbr\u003e- V4 arms are manufactured from chromoly 28mm OD (3mm wall) tube with billet CNC machined ends. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms (toe arms, camber and rear LCA's), CNC tube notched (camber and LCA's) and TIG welded. \u003cbr\u003e- 20 degree bend in the end of the arm to clear chassis rails on lowered vehicles\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696557331,"sku":"rear-cmbr","price":339.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_1657_1.jpg?v=1675658927"},{"product_id":"sr20-rocker-arm-stoppers-ras","title":"SR20 Rocker Arm Stoppers \/ RAS","description":"\u003cp\u003eUsed for extra reliability at high RPM in SR engines. These rocker arm stoppers hold the lash adjuster side of the rocker arm at a fixed clearance, preventing extra movement at high RPM.\u003c\/p\u003e\n\u003cp\u003e- Laser Cut Mild Steel and Zinc coated\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMADE IN AUSTRALIA. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696852243,"sku":"sr20-rask","price":69.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/sr20-rask_tb.jpg?v=1675391174"},{"product_id":"28mm-blow-off-valve-return-blocker","title":"28mm Blow Off Valve return blocker","description":"\u003cp\u003eThe GKTECH Blow Off Valve return blocker and is to be used on the intake pipe when the standard blow-off valve is removed. If the hole left from removing the blow-off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough.\u003c\/p\u003e\n\u003cp\u003e- 1 piece billet aluminium construction - Direct replacement \u003cbr\u003e- 28mm's in diameter\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317696917779,"sku":"univ-bovb","price":26.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/valve_black_tn.jpg?v=1675385148"},{"product_id":"4-to-5-stud-wheel-adapters","title":"4 to 5 stud wheel adapters","description":"\u003cp\u003eThe GKTECH 4 to 5 stud wheel adapters allow a 4x114.3 stud car to fit 5x114.3 stud wheels.\u003c\/p\u003e\n\u003cp\u003eSold as a pair these wheel adapters bolt on to your standard hub just like a normal wheel spacer however 1 of your standard studs is then replaced with a longer stud which runs through the adapter and acts as the 5th stud.\u003c\/p\u003e\n\u003cp\u003eThe wheel adapters are hub centric to suit Nissans 66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength.\u003c\/p\u003e\n\u003cp\u003eA super easy and cheap way to make your S13\/180sx 5 stud.\u003c\/p\u003e\n\u003cp\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 studs - Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread - 20mm thick wheel adapters \u003cbr\u003e- Includes extra wheel studs required to install the adapters.\u003cbr\u003e\u003cstrong\u003e- \u003c\/strong\u003eSold as a \u003cstrong\u003ePAIR\u003cbr\u003e\u003cbr\u003eNOTE: The kit includes an extra long 13mm knurled stud that needs to replace the OEM stud. All 4 stud models listed either use only a 12.8mm or 13mm stud, however it is recommended to check if you believe your stud may be larger. If you do need a larger stud we have them \u003ca href=\"https:\/\/au.gktech.com\/products\/individual-20mm-extended-wheel-studs?_pos=1\u0026amp;_psq=+1X-1280-50MM\u0026amp;_psid=30daaaced\u0026amp;_ss=e\u0026amp;_v=1.0\u0026amp;variant=44382414831891\"\u003eHERE\u003c\/a\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697081619,"sku":"4to5-spcr","price":169.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/MG_6178.jpg?v=1780362870"},{"product_id":"t2-stainless-steel-turbo-to-manifold-gasket","title":"T2 stainless steel turbo to manifold gasket","description":"\u003cp\u003eThis stainless steel turbo to manifold gasket is a direct replacement of the standard unit and is an upgrade from your general carbon composite manifold gaskets which are prone to blowing out. \u003cbr\u003e\u003cbr\u003e - Race tested and a proven performer \u003cbr\u003e- Replacement for Nissan part 14415-17MOO\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697278227,"sku":"trbo-gskt","price":18.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/2016-09-22_09.47.27_1.jpg?v=1675391446"},{"product_id":"5x114-3-spacers-15mm-30mm-8-piece-set","title":"5x114.3 spacers 15mm \u003e 30mm 8 piece set","description":"\u003cp\u003eThe GKTECH 15mm \u0026gt; 30mm spacers allow for adjustment of the fitment of your wheels. The set allows for 9 different widths to be made to ensure perfect wheel fitment, the 9possible widths are 3,15,18,20,22,23,25,27,30mm. The wheel spacers are hub centric to suitNissans66.1mm hub and are manufactured to the highest quality in T6061 Aluminium and then hard anodized to further increase the strength.\u003c\/p\u003e\n\u003cp\u003eThe ultimate adjustable width set of spacers. \u003cbr\u003e- CNC machined aluminium T6-6061 construction \u003cbr\u003e- Grade 10.9 studs \u003cbr\u003e- Hub centric to suit 66.1mm Nissan hubs \u003cbr\u003e- 114.3mm PCD with M12 x 1.25 thread \u003cbr\u003e- 60mm long studs \u003cbr\u003e\u003cspan\u003e- Oval shaped studs to prevent stripping of the knurl\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Sold as a PAIR\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697310995,"sku":"spcr-5114","price":259.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/stack5-transformed.jpg?v=1683241058"},{"product_id":"s15-r32-r33-gtr-solid-shifter-bushing","title":"S15 200sx \/ R32 GTR \/ R33 GTR Solid shifter bushing","description":"\u003cp\u003eReplace your old worn factory shifter bushing and you will drastically improve the feel of your shifter.\u003c\/p\u003e\n\u003cp\u003e- Light weight aluminium bronze construction \u003cbr\u003e- Direct replacement of your plastic factory item\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: If you have an S15 Varietta and it is 5speed you need the shifter bush seen \u003ca href=\"https:\/\/au.gktech.com\/products\/s13-180sx-s14-r32-gts-t-solid-shifter-bushing?_pos=3\u0026amp;_psq=gear-bush\u0026amp;_ss=e\u0026amp;_v=1.0\"\u003eHERE\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697343763,"sku":"GTRX-BUSH","price":22.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_0317_1.jpg?v=1675742372"},{"product_id":"4130-high-tensile-steel-steering-rack-spacer-set","title":"4130 high tensile steel steering rack spacer","description":"\u003cp\u003eThe GKTECH high tensile 4130 zinc coated tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock. Great for drift or getting out of parking spots. Can be used either with or without the extra washer (included), with the washer this kit offers a grand total of 19mm of rack travel and 12-15 degrees of extra lock without compromising on the amount of thread left in the steering rack.\u003c\/p\u003e\n\u003cp\u003e- DIY installation (not as easy as the washer install but still not too hard) \u003cbr\u003e- CNC machined high tensile zinc coated 4130 steel\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697474835,"sku":"TROD-EXTN","price":46.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_0168.jpg?v=1675654046"},{"product_id":"billet-aluminium-solid-gearbox-mount","title":"S13\/S14\/S15\/ R32 GTS-T Skyline Billet aluminium solid gearbox mount","description":"\u003cp\u003eThe GKTECH solid gearbox mount is a direct replacement of the standard item and drastically increases the feel of the gearbox. \u003cbr\u003e\u003cbr\u003e- CNC Machined from 6061-T6 billet aluminium and anodized black\u003cbr\u003e- Includes all fittings required for a direct install\u003cbr\u003e- Fits the Gktech Z33 350z\/ Z34 370z Crossmember with slight shaving to one side\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697540371,"sku":"SLID-GBOX","price":89.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/slid-gbox1_tb.jpg?v=1675742288"},{"product_id":"s14-s15-subframe-weld-in-reinforcement-plates","title":"V2 S14\/S15 200sx\/Silvia subframe weld in reinforcement plates","description":"\u003cp\u003eThe GKTECH V2 S14\/S15subframe weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most. \u003cbr\u003e\u003cbr\u003eLaser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier than attempting to do it yourself. The V2 reinforces the area around the rear diff more and the overall fit is better than our previous V1.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eNOTE: Will not work on HICAS subframes. For our HICAS specific version please refer to this listing:\u003ca href=\"https:\/\/au.gktech.com\/v2-r33-skyline-subframe-weld-in-reinforcement-plates\"\u003ehttps:\/\/au.gktech.com\/v2-r33-skyline-subframe-weld-in-reinforcement-plates\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317697736979,"sku":"s145-subf","price":153.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_6377_rev_thumb_0d49659f-3736-480d-ada7-66fd6eecd283.jpg?v=1675381612"},{"product_id":"s14-s15-k-frame-caster-mount-weld-in-reinforcement-plates","title":"S-Chassis K-Frame\/Caster mount weld in reinforcement plates","description":"\u003cp\u003eThe GKTech weld in K frame\/caster rod plates has been designed to help brace one of, if not the most necessary area on your S-chassis. Caster rods put an immense amount of load on the K frame and the K frame itself flexes under load a visually noticeable amount. Our weld in plates will help eliminate this which will result in better overall handling and steering feedback. The added benefit is that if you ride over a ripple strip at the race track (or a gutter on the street) the flat bottom of the K frame will help glide you over rather than you getting stuck and pulling half your car to pieces.\u003c\/p\u003e\n\u003cp\u003e- CAD Designed\u003cbr\u003e- CNC Laser Cut from 2mm C30 steel\u003cbr\u003e- Dimple died for increased rigidity\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"S13\/180SX","offer_id":44333867270419,"sku":"S13X-KFRM","price":109.0,"currency_code":"AUD","in_stock":true},{"title":"S14\/S15","offer_id":44333867303187,"sku":"S145-KFRM","price":109.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_4839_2.jpg?v=1675299783"},{"product_id":"offset-steering-rack-extenders","title":"V3 4130 high tensile offset steering rack extenders","description":"\u003cp\u003eThe GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind.\u003c\/p\u003e\n\u003cp\u003eGreat for drift or getting out of parking spots. The offset rack spacers are a great alternative to moving the steering rack forward and offer 19mm's extra steering lock without compromising on the amount of thread left in the steering rack.\u003c\/p\u003e\n\u003cp\u003e- DIY installation (not as easy as the washer install but still not hard at all) \u003cbr\u003e- CNC machined high tensile zinc coated 4130 steel with grade 12.9 bolts\u003cbr\u003e- 1\/2\" internally driven drive bolt size for an easy install\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: These may require notching to the early model steering racks, as the OEM notches can vary across models\/years.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317698392339,"sku":"OFFX-RACK","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/photo_22-9-20_9_16_03_am_1.jpg?v=1675653209"},{"product_id":"sr-ka-rb-vg-high-performance-engine-fan-60-more-air-flow","title":"SR20\/KA24 High Performance Engine fan - 60% more air flow","description":"\u003cp\u003e\u003cstrong\u003eOver 10,000 sold! This is probably the single best cooling mod you can do to your car!\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe GKTECH high-performance engine fan has been designed and engineered in Australia by our in-house team with the intention of pulling more air than the factory item.\u003cbr\u003e\u003cbr\u003eWhen tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90 degrees to operating temperature (good for next time you're on the start line at the track).\u003cbr\u003e\u003cbr\u003eSuper easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit the SR\/KA engine.\u003cbr\u003e\u003cbr\u003e- Direct replacement of the standard fan\u003cbr\u003e- Pulls 60% more air than the factory SR fan\u003cbr\u003e\u003cbr\u003eWe do sell an RB\/ VG specific fan which can be seen here: \u003ca href=\"https:\/\/au.gktech.com\/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow\"\u003ehttps:\/\/au.gktech.com\/rb-skyline-gt-r-high-performance-engine-fan-40-more-air-flow\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: Can NOT be used in conjunction with Nismo engine mounts on an S13\/180sx as the mounts raise your motor approximately 20mm's which will make our fan hit your radiator shroud (our fan is 15mm larger in diameter than the OEM SR20 fan) however S14\/S15's with Nismo engine mounts are fine and our fan will fit.\u003cbr\u003e\u003cbr\u003eNOTE#2: Do NOT trim the clutch fan if it comes close to intercooler piping. When installing the fan ensure that there is at least 10-20mm's clearance between the fan and anything around it, keeping in mind that your engine moves when under acceleration and braking.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317698457875,"sku":"CLCH-FANX","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/SRfan-thumb.jpg?v=1683170434"},{"product_id":"t2-stainless-steel-turbo-locking-tabs","title":"T2 stainless steel turbo locking tabs","description":"\u003cp\u003eThe GKTECH stainless steel turbo locking tabs are critical in keeping your turbo nuts in their place and stopping them from coming loose. The factory items are typically damaged from the heat of the turbo after a number of years so it's a good idea when you've got the turbo off, to replace these at the same time.\u003c\/p\u003e\n\u003cp\u003eSimply bend up the ends of the tabs against the turbo nuts to keep them in their place. - Alternative for Nissan part 14495-40P10\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Compatibility: \u003cbr\u003e\u003c\/strong\u003e- Fits all T2 flanged turbo applications (ie. T25, T28, GT2871r etc. etc.)\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Sold as a PAIR\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317698785555,"sku":"TRBO-LOCK","price":8.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_9470.gif?v=1675647981"},{"product_id":"v2-s-r-z32-chassis-adjustable-rear-lower-control-arms","title":"V2 S\/R\/Z32 Chassis Adjustable Rear lower control arms","description":"\u003cp\u003eThe V2 GKTECH Rear Lower Control Arms (aka LCA's) are built to a high standard and are far from the generic garbage that most people are used to, but at a very reasonable price. These arms are CAD designed, FEA tested, track tested (including 2 accidental crashes), have CNC machined ends, they're mandrel bent, CNC tube notched and TIG welded and to finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention.\u003c\/p\u003e\n\u003cp\u003eTo top it off we're exclusively using high-quality Teflon lined bearings (over $140 in bearings cost for the pair on their own) Our rear lower control arms allow for + or - 15mm's of track width and are the only LCA's that we know of that allow adjustment perpendicular to the centreline of the car which means that as you change the width your wheel doesn't push further back or forward into the wheel arch (unintentionally altering your suspension curves).\u003c\/p\u003e\n\u003cp\u003eWider track for FR cars gives more grip and less body roll and by adjusting the rear LCA's you can alter a vehicles understeer\/oversteer properties. \u003cbr\u003e\u003cbr\u003e- Feature 3\/4\" Teflon lined, high misalignment spherical bearings which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.\u003cbr\u003e- Manufactured from chromoly 22mm OD (2.5mm wall) tube and 4130 chromoly sheet with CNC machined ends. \u003cbr\u003e- CAD designed, FEA tested, CNC machined ends, CNC mandrel bent arms, CNC tube notched and TIG welded \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWant more technical information, product benefits and a look into the design process? Click here:\u003c\/strong\u003e \u003ca href=\"https:\/\/au.gktech.com\/v2-adjustable-rear-lower-control-arms\"\u003ehttps:\/\/au.gktech.com\/v2-adjustable-rear-lower-control-arms\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE: If you are intending on running the rear LCA's any wider than 10mm's over factory it is recommended that you run axle spacers as seen here:\u003ca href=\"https:\/\/au.gktech.com\/v2-axle-spacers-5mm-10mm-or-15mm\"\u003ehttps:\/\/au.gktech.com\/v2-axle-spacers-5mm-10mm-or-15mm\u003c\/a\u003e \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE#2: If you're are intending on running the rear LCA's any shorter than around -5mm please ensure that your suspension arms have adequate inward adjustment. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE#3: If you are intending on running the rear LCA's shorter than the OEM arms please ensure that your upper arms have adequate adjustment based on your setup. A raised subframe and\/or drop knuckles both reduce the amount of negative adjustment available.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317699146003,"sku":"REAR-LCAX","price":899.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/MG_1832_6e042f1a-61e0-470b-8dcc-e4322ea67d98.jpg?v=1746005399"},{"product_id":"stand-alone-ss-braided-brake-line-kit","title":"Stand alone SS braided brake line kit","description":"\u003cp\u003eThe GKTECH Wilwood stand-alone SS braided brake line kit are designed to be used with Wilwood calipers in the rear and to be used with a Wilwood master cylinder (with a 1\/8NPT thread). These lines go all the way from the master cylinder to the rear calipers.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection. They have passed independent testing and are marked as complying to FMVSS106 standards, ADR approved and are DOT compliant.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eWill suit ALL S\/R chassis Nissans.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317699670291,"sku":"STAL-BRKE","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/STAL-BRAKE-THUMB-_0000_IMG_E6655.jpg?v=1681874208"},{"product_id":"s-chassis-dual-caliper-brackets-to-suit-wilwood-caliper-pair","title":"S-chassis dual caliper brackets to suit Wilwood caliper (pair)","description":"\u003cp\u003eThe GKTECH S-chassis dual caliper bracket allows the use of a Wilwood 120-10188 caliper in conjunction with an OEM S chassis rotor\/caliper combo for use as a standalone hydraulic handbrake.\u003c\/p\u003e\n\u003cp\u003eIt is super simple to install with the only modification being to the standard dust cover. Alternatively, avoid wasting time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work and check out our complete kit.\u003c\/p\u003e\n\u003cp\u003eAs seen here at a 10% off combo discount:\u003cbr\u003e\u003ca href=\"https:\/\/au.gktech.com\/products\/wilwood-s-chassis-dual-caliper-hydraulic-handbrake-setup-10-combo-discount\"\u003eWILWOOD S-CHASSIS DUAL CALIPER HYDRAULIC HANDBRAKE SETUP - (10% COMBO DISCOUNT)\u003c\/a\u003e\u003cbr\u003e \u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317699703059,"sku":"DUAL-BRKT","price":199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/dual_brkt-transformed.jpg?v=1683174485"},{"product_id":"s14-s15-40mm-roll-center-correction-kit","title":"V2 S14\/S15 bolt on angle kit (RCC kit)","description":"\u003cp\u003eThe V2 GKTECH roll center correction kit is now made from 1030 forged steel and provides 40mm of roll center correction, 40mm of bump steer correction and also re-positions the steering arm to increase the steering lock. With two different pickup points for the tie rod, this now offers two settings, allowing for more aggressive steering response and less Ackerman which will provide faster steering!\u003c\/p\u003e\n\u003cp\u003eThe roll centre correction kit bolts up to the bottom of your standard knuckle and can be removed with no ramifications at all. Circa 60+ degrees of lock is achievable without offset rack spacers once the factory LCA lock stop is removed but if you're running lots of camber or caster using our offset rack spacers is a good idea to avoid steering bind. With supporting modifications, these can see a similar lock to V4 drop knuckles!\u003c\/p\u003e\n\u003cp\u003eWith the introduction of our NEW price, they are by far the cheapest way of getting both roll centre correction and lock!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan\u003e \u003cstrong\u003eWant to see these in action?\u003c\/strong\u003e The following car has our RCCK, slip in rack spacers and high clearance castor arms! All other parts OEM\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700030739,"sku":"S145XRCK","price":279.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_2665_1.jpg?v=1675656738"},{"product_id":"2-pot-nissan-stand-alone-ss-braided-brake-line-kit","title":"2 pot Nissan stand alone SS braided brake line kit","description":"\u003cp\u003eThe GKTECH 2 pot Nissan stand alone SS braided brake line kit is designed to be used with Nissan 2 pot calipers, when setting up a dual caliper hydraulic handbrake kit. \u003cspan\u003eThese lines go all the way from any selected master cylinderwith a 3\/8-24 threadto the rear calipers. As seen in our V2 handbrake assembly, as seen here:\u003ca href=\"https:\/\/au.gktech.com\/v2-hydraulic-handbrake-assembly\"\u003ehttps:\/\/au.gktech.com\/v2-hydraulic-handbrake-assembly\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe GKTECH braided brake lines are assembled by us in-house in Australia using stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection. They have passed independent testing and are marked as complying to FMVSS106 standards, ADR approved and are DOT compliant.\u003c\/span\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700129043,"sku":"2POT-LINE","price":229.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/IMG_6216_ade4e199-5fe4-4789-8b3d-5220681cdfe0.jpg?v=1681775345"},{"product_id":"2-pot-nissan-dual-caliper-brackets-pair","title":"2 pot Nissan dual caliper brackets (pair)","description":"\u003cp\u003eThe GKTECH 2 pot Nissan dual caliper bracket is unique in that it doesn't require the use of Mustang rotors (common among others) and only spaces the hub out 7mm's with limited modifications required to fit.\u003c\/p\u003e\n\u003cp\u003eIn addition to the minimal spacing, this is also the only bracket that we're aware of that retains the factory drum handbrake. Compatible with either a pair of Z32, R32, R33 or R34 2-piston rear calipers using the corresponding rotor.\u003c\/p\u003e\n\u003cp\u003eIf you don't want to waste time shopping around for all the individual parts, getting custom brake lines made up, or running generic parts that may or may not work and check out our complete kit.\u003c\/p\u003e\n\u003cp\u003eAs seen here at a 10% off combo discount:\u003cbr\u003e\u003ca href=\"https:\/\/au.gktech.com\/products\/2-pot-nissan-dual-caliper-hydraulic-handbrake-setup-10-combo-discount\"\u003e2 Pot Nissan dual caliper hydraulic handbrake setup\u003c\/a\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700194579,"sku":"2POT-BRKT","price":329.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/caliper-brack-transformed.jpg?v=1683174552"},{"product_id":"nissan-1-3kg-cm2-high-pressure-radiator-cap1","title":"Nissan 1.3kg\/cm2 high pressure radiator cap","description":"\u003cp\u003eThe GKTECH 1.3kg\/cm2 high-pressure radiator cap is a direct fit for all Nissans and raises the pressure in the coolant system to 1.3kg\/cm2 (from 0.9 for most Nissans). Extra pressure allows for a higher boiling point = better cooling. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eNOTE: Do NOT remove your radiator cap while your car is hot.\u003cbr\u003e\u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700227347,"sku":"RADX-CAPX","price":16.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_0668-1_1.jpg?v=1675386450"},{"product_id":"s14-s15-r33-r34-hicas-lock-bar","title":"S14\/S15\/R33\/R34 HICAS Lock bar","description":"\u003cp\u003eThe all new V3 chromoly rear HICAS lock bar is a direct replacement of your stock HICAS steering unit and as the name suggests, locks the rear steer in place. Essential for Motorsport or as an option to fix the broken expensive OEM Nissan part.\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700260115,"sku":"HICS-LOCK2","price":139.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/hics-lock2_2.jpg?v=1675645413"},{"product_id":"v2-s-r-z32-chassis-rear-knuckles-with-all-new-kinematics","title":"V2 S\/R\/Z32 chassis Rear knuckles with all new kinematics","description":"\u003cp\u003eCombined 8 years of product development and over 1,000 pairs sold we bring to you the V2 S\/R\/Z32 chassis rear knuckles. We have developed a lightweight yet strong drop knuckle. They come with dual caliper brackets as standard, high-quality PTFE lined spherical bearings throughout and have all new kinematics to drastically improve anti-squat, bump steer, camber gain curves and raised roll center height. The V2 adds even more rigidity over our very popular V1.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e- Ability to run dual caliper without spacing the rotor out\u003cbr\u003e- Ability to run drum brake in standard position with dual calipers(or single caliper) installed\u003cbr\u003e-Ability to run Wilwood 120-10188 as a dual caliper to the OEM 9mm solid rotor.\u003cbr\u003e- The drop is 40 mm - optimized for cars 40 mm lower than factory ride height (more drop would have required proprietary arms)\u003cbr\u003e- High-quality PTFE lined spherical bearings throughout as standard, common bearing size that we sell replacements for (Part Number: COM10T)\u003cbr\u003e- All new kinematics to significantly increase grip over regular drop knuckles\u003cbr\u003e- Optimized camber curve for more even tire wear\u003cbr\u003e- Optimized bump steer for toe-in under compression without OEM arms' elastokinematics\u003cbr\u003e- Increased anti-squat for more rear weight transfer and traction\u003cbr\u003e- Raised roll center height for better handling\u003cbr\u003e- Lightweight sheet metal design optimized using finite element analyses for ultimate strength - fully dressed weight (bearings, spacers, circlips) 3.9kg (standard knuckle is 5.1kg)\u003cbr\u003e- Clearance for larger GTR drive shafts\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003eView this post on Instagram\u003c\/div\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.instagram.com\/p\/Bu7TDWSnyl9\/?utm_source=ig_embed\u0026amp;utm_medium=loading\u0026amp;utm_campaign=embed_loading_state_script\" target=\"_blank\"\u003eA post shared by GKTECH (@gktech_official)\u003c\/a\u003e on \u003ctime datetime=\"2019-03-12T23:29:39+00:00\"\u003eMar 12, 2019 at 4:29pm PDT\u003c\/time\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eINSTALLATION NOTES\u003c\/strong\u003e:\u003cbr\u003e\u003cbr\u003e- To be mounted with bearing mounting holes perpendicular to the ground in static height (extended LCA's that push the wheel out to the rear of the wheel arch will NOT work well, or at all if extended too far out). Note that our rear LCA's adjust perpendicular to the centerline of the car, which makes sense.\u003cbr\u003e\u003cbr\u003e- Will fit all GTR and Z32 chassis' with the use of an S chassis style lower coilover mounting.\u003cbr\u003e\u003cbr\u003e- Will clear 17\" rims (and even 16\" rims with low offsets) and all 18\" rims but please note that the closer the rim sits in the wheel-well, the greater the chance that the toe arm mount will come close to hitting. A 17x10.5 +22 Enkei RPF1 wheel was tested and still has around 5 mm of clearance (ample)\u003cbr\u003e\u003cbr\u003e- Aftermarket camber, toe and traction rods ARE required and MUST have rose joints as the suspension mounting points on the knuckle are in significantly altered and rubber or similar wouldn't have enough misalignment to work. Lower control arms can be OEM or aftermarket and do not need to be changed. OEM bushings in lower control arms will produce different bump steer curves\u003cbr\u003e\u003cbr\u003e- OEM S-chassis single piston calipers can be used in a single or dual configuration BUT the drum lever won't fit without modifications.\u003cbr\u003e\u003cbr\u003eAlternatively you can use the single piston caliper as the foot brake and the Wilwood 120-10188 which is seen \u003ca href=\"https:\/\/au.gktech.com\/products\/889545000740?_pos=2\u0026amp;_psq=wilwood\u0026amp;_ss=e\u0026amp;_v=1.0\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eHERE\u003c\/a\u003e as the dual caliper handbrake.\u003cbr\u003e\u003cbr\u003e- OEM GTS-T\/GT-R\/Z32 2 piston calipers are a direct fit and the OEM drum assembly fits just like OEM.\u003cbr\u003e\u003cbr\u003e- For optimal results, S14\/S15 or R33 subframe is recommended, or the use of our S13\/R32 RLCA anti squat kit:\u003cbr\u003e\u003ca href=\"https:\/\/au.gktech.com\/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit\"\u003eS13\/180SX\/R32 SUBFRAME ANTI-SQUAT REDUCTION WELD IN KIT\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWant to know how they were designed, the benefits and more technical information? Click below:\u003cbr\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/au.gktech.com\/blogs\/news\/gktech-rear-suspension-uprights\/\"\u003eGKTECH REAR SUSPENSION UPRIGHTS\u003c\/a\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317700882707,"sku":"REAR-KNCK","price":1299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/img_5042_2.jpg?v=1675658183"},{"product_id":"inline-braided-brake-line-kit","title":"In-line braided brake line kit","description":"\u003cp\u003eThe GKTECH In-line braided brake line kit is designed to be used with your existing brake calipers. \u003cbr\u003e\u003cbr\u003eThese lines are to suit a master cylinder with a 3\/8-24 threaded outlet and a 7\/16-20 outlet like used with the Flux in-line master cylinders that we sell. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe GKTECH braided brake lines are assembled using stainless steel fittings and hose that consists of a Teflon inner tube wrapped in stainless steel braid and a PVC outer coating for protection. The brake lines have been independently tested to comply with FMVSS106 standards for brake hoses. This makes the lines ADR approved in Australia and they are marked as such on the brake line assemblies.\u003cbr\u003e\u003cbr\u003eThe FMVSS106 testing procedure that the lines have been tested against includes the following tests:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e370lbs pull test\u003c\/li\u003e\n\u003cli\u003e35 hour whip test\u003c\/li\u003e\n\u003cli\u003e7000psi burst test\u003c\/li\u003e\n\u003cli\u003e-45degC to 146degC temperature tests\u003c\/li\u003e\n\u003cli\u003e24 hour salt corrosion resistance test\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere are four options to choose from, if your handbrake is mounted in front of the shifter, meaning shorter lines are required, then please choose the in front variant. If your handbrake is mounted behind the shifter (towards the back of the vehicle) then please choose the rear option. The LHD and RHD options are self explanatory. \u003cbr\u003e\u003cbr\u003eIf your handbrake is mounted behind the shifter, eg. if you have our hidden handbrake or budget hydraulic handbrake with the lever mounted horizontally then you would select the behind shifter variant. \u003cbr\u003e\u003cbr\u003e- For race cars only however no permanent modifications are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Can NOT be installed on cars with ABS still fitted however can be used in conjunction with our ABS delete kit.\u003c\/strong\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"In front of shifter - RHD","offer_id":47828291518739,"sku":"BUDG-ILNE","price":169.0,"currency_code":"AUD","in_stock":true},{"title":"In front of shifter - LHD","offer_id":47828291551507,"sku":"LHDB-ILNE","price":169.0,"currency_code":"AUD","in_stock":true},{"title":"Behind shifter - RHD","offer_id":47828311408915,"sku":"HDDN-ILNR","price":176.0,"currency_code":"AUD","in_stock":true},{"title":"Behind shifter - LHD","offer_id":47828320911635,"sku":"HDDN-ILNL","price":188.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/IMG_6198_cd266faa-ac6b-4e0a-83f1-0b7192762d97.jpg?v=1681775232"},{"product_id":"s13-180sx-r32-gts-t-4-bolt","title":"S\/R chassis Billet aluminium extended diff cover","description":"\u003cp\u003e\u003cstrong\u003eTAKING EXPRESSIONS OF INTEREST NOW\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe GKTECH billet extended diff cover provides an extra 900cc capacity over the standard item and helps with keeping your diff oil at lower temperatures under hard conditions. This item is primarily useful for track use however it is also a very attractive item. From under the rear bumper the diff cover will stand out quite a bit. Our CNC machined billet diff covers are the original and have been making rear subframes pop since 2012.\u003c\/p\u003e\n\u003cp\u003e- High quality billet aluminium 6061-T6 construction \u003cbr\u003e- Baffle plate, new studs and new stainless steel plugs included\u003cbr\u003e- Available in 10 different flavours; black, silver, raw aluminium (uncoated), gold, blue, pink, purple, neo chrome, red or orange. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: Will NOT fit with HICAS system still installed or with the use of a HICAS lock bar.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003eTAKING EXPRESSIONS OF INTEREST NOW\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"4BLT-DIFF","offer_id":44518213124371,"sku":"4BLT-DIFF","price":711.75,"currency_code":"AUD","in_stock":false},{"title":"R200-DIFF","offer_id":44518213157139,"sku":"R200-DIFF","price":711.75,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/products\/diff_cover_1_9.jpg?v=1677728274"},{"product_id":"ca18-sr20-ka24-v2-solid-engine-mounts-pair","title":"CA18\/SR20\/KA24 V2 Solid engine mounts (Pair)","description":"\u003cp\u003eThe GKTECH CA18\/SR20 V2 solid engine mounts are a direct replacement of the standard item and help reduce engine movement and get power to the ground. \u003cbr\u003e\u003cbr\u003eParticularly useful in a drift car where the car is off and on the throttle.\u003c\/p\u003e\n\u003cp\u003e- CNC machined aluminium\u003cbr\u003e- Offset studs to match OEM design ensure perfect mounting angles\u003cbr\u003e- Locating pin to prevent twisting of the mount when torqued to spec \u003cbr\u003e- Replacement part for Nissan part numbers: 1121065f11, 1122085F00, 1122065F01, 1122065F06 or Nismo part numbers 11210-RS540 and 11220-RS540 \u003cbr\u003e- Sold as a PAIR\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNOTE: Will drastically increase NVH (NOISE). Not ideal for a daily driver or non-dedicated race car. \u003c\/b\u003e\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317701243155,"sku":"SR20-MUNT","price":129.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/SR20-MUNT_Temp_THUMB_7ec88baa-19e7-4c54-90dd-00083aa6c94b.jpg?v=1782374406"},{"product_id":"hfm-clutch-master-cylinder-s14-s15-r33","title":"HFM.Parts Clutch Master Cylinder S14, S15, R33","description":"\u003cp\u003eThe HFM.Parts Clutch Master Cylinder is a direct replacement of the OEM Unit. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eReplaces factory Nissan part numbers: \u003cbr\u003eR33 (OEM P\/N: 30610-21007)\u003cbr\u003e S14 (OEM P\/N: 30610-74F91) \u003cbr\u003eS15 (OEM P\/N: 30610-88F07)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE: The HFM.Parts Clutch Master Cylinder Brake line feed is from the bottom.\u003c\/strong\u003e\u003c\/p\u003e","brand":"HFM.Parts","offers":[{"title":"Default Title","offer_id":44317701406995,"sku":"HFM-NISS-CLT-0004","price":119.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/0002_HFM-NISS-CLT-0004.jpg?v=1740972504"},{"product_id":"hfm-parts-300mm-multi-stud-rear-rotor-upgrade-kit-s13-s14-s15-180sx-200sx","title":"HFM.Parts 300mm Multi Stud Rear rotor upgrade kit S13, S14, S15, 180SX, 200SX","description":"\u003cp\u003eThe HFM.Parts Multi Stud Rear Rotor upgrade kit now allows you to increase your 258mm OEM Rotors to 300mm whilst still retaining your OEM Calipers. Includes rotors, brackets and all bolts required.\u003c\/p\u003e\n\u003cp\u003eThe rotors included are Slotted for better braking and heat disbursement.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HFM.Parts","offers":[{"title":"Default Title","offer_id":44317701472531,"sku":"HFM-NISS-BRK-00022","price":449.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/0003_HFM-NISS-BRK-00022.jpg?v=1740972646"},{"product_id":"hfm-parts-337mm-rear-rotor-upgrade-kit-r32-r33-r34","title":"HFM.Parts 337mm Rear Rotor Upgrade Kit R32, R33, R34","description":"\u003cp\u003eThe HFM.Parts Rear Rotor upgrade kit now allows you to increase your 292mm OEM Rotors to 337mm whilst still retaining your OEM Calipers.\u003c\/p\u003e\n\u003cp\u003eIncludes rotors, brackets and all bolts required . The rotors included are Slotted and Crossed drilled for better braking and heat disbursement.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HFM.Parts","offers":[{"title":"Default Title","offer_id":44317701538067,"sku":"RK3376418","price":504.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/0000_RK3376418.jpg?v=1740973261"},{"product_id":"s14-s15-r32-r33-r34-z32-extended-20mm-ball-joint-shank","title":"S14\/S15\/R32\/R33\/R34\/Z32 Extended +20mm ball joint shank","description":"\u003cp\u003eS14\/S15\/R32\/R33\/R34\/Z32 Extended +20mm ball joint shank\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003eSold as a pair\u003c\/p\u003e","brand":"GKTECH","offers":[{"title":"Default Title","offer_id":44317702684947,"sku":"145ESHANK","price":59.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/0772\/2259\/files\/IMG_2515.jpg?v=1690266954"}],"url":"https:\/\/au.gktech.com\/collections\/s15.oembed?page=4","provider":"GKTech Australia","version":"1.0","type":"link"}