V4.2 - S14/S15/R33 caster arms

Rating:
100% of 100
AU$279.00

Availability: In stock

Ships today if ordered in the next 9 hours and 6 minutes!

The new V4.2 GKTECH Caster Arms offer the most amount of clearance available in a caster rod while now being 16mm thick!

Caster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel. - V4.2 arms feature high quality 5/8" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel.

- V4.2 arms feature high quality 5/8" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. 
- V4.2 arms are manufactured from 4130 chromoly sheet with billet CNC machined ends and CNC machined 4130 chromoly adjusters. 
- CAD designed, FEA tested, CNC machined ends and TIG welded 
- V4.2 arms include offset bush spacers for even more clearance 
- Offers a total of 56mm extra wheel clearance which equates to roughly 9 degrees of additional wheel clearance.

Vehicle Compatibility: 
- Nissan S14 200SX 
- Nissan S15 200SX 
- Nissan Skyline R33 GTS-T (2WD)

NOTE: If you require S13 Silvia/180sx / R32 Skyline caster arms please refer to our other listing to suit.

Description

The new V4.2 GKTECH Caster Arms offer the most amount of clearance available in a caster rod while now being 16mm thick!

Caster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel. - V4.2 arms feature high quality 5/8" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel.

- V4.2 arms feature high quality 5/8" Teflon lined pillow ball rod ends which eliminate the flex found in factory rubber bushing offering a more direct and predictable feel. 
- V4.2 arms are manufactured from 4130 chromoly sheet with billet CNC machined ends and CNC machined 4130 chromoly adjusters. 
- CAD designed, FEA tested, CNC machined ends and TIG welded 
- V4.2 arms include offset bush spacers for even more clearance 
- Offers a total of 56mm extra wheel clearance which equates to roughly 9 degrees of additional wheel clearance.

Vehicle Compatibility: 
- Nissan S14 200SX 
- Nissan S15 200SX 
- Nissan Skyline R33 GTS-T (2WD)

NOTE: If you require S13 Silvia/180sx / R32 Skyline caster arms please refer to our other listing to suit.

Want to see the clearance and lock achievable with these arms? Click here:
https://www.instagram.com/p/Bu7TDWSnyl9/

FAQ's

Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.

Do you make these to suit other cars?
We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.

However, we do sell these arms for S13/180sx/R32/A31/Z32 which can be seen here: https://au.gktech.com/v4-s13-180sx-r32-a31-z32-caster-arms

What's the advantage of using the GKTech caster arms?
This style of caster rod has been used as they offer the most amount of clearance. The wheel will hit the chassis rail before touching the caster arms, even after the lip has been massaged out of the way.

What modifications are required, is this hard to fit?
No modifications are required, simply just remove and refit.

Is there anything else needed for installation?
No, we do supply nuts and bolts for the rear of the caster arm however you will need to use your OEM bolt for the front. In terms of the arms themselves, they will arrive as shown in the product photo.

Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 30 minutes. However, being a suspension component we recommend only a trained professional to install this product.

Will I have to get a wheel alignment after installing these?
Even if you have matched the arm length to OEM. We still do recommend a wheel alignment after any suspension changes.

Are these suspension arms legal for use on street cars?
Our understanding is that any suspension arm with a rose joint is not legal for street use in Australia. However, we do recommend that you contact your local RTA for clarification/confirmation. Whether you use a suspension arm with a rose joint on public roads is at your discretion.

How long is the warranty on these arms?
All GKTech suspension arms come with a lifetime warranty against manufacturing defects, this does not include crashes.

The Teflon lined rose joints come with a 1-year replacement warranty. We stock spare bearings so even after the 12 months is up we can still help with replacements.

Spare rose joints can be seen here: https://au.gktech.com/replacement-pcml12te-bearing

Any local bearing supplier should stock these bearings, we say this as we use common size bearings in all of our products.

The common size bearing part number needed for this product is: PCML12TE

Write Your Own Review
You're reviewing:V4.2 - S14/S15/R33 caster arms
Your Rating

Products just like this

Check items to add to the cart or

Have you seen these?

Copyright © 2007 - 2019 Geskin International Pty. Ltd. T/as GKTECH. All Rights Reserved.