+20mm > +45mm

The GKTECH V2 High Clearance LCA's are designed as a direct replacement for an OEM style LCA but with adjustment and loads of tie rod clearance for maximum dorifto. Our Budget LCA's are great for someone that already has caster rods or wants caster rods as a separate piece. 

Even with the addition of our V4 high clearance caster rods, the cost of going this route is around 25% cheaper than our premium 1pc LCA/caster rod piece. The arms offer 25mm of adjustment, will support 70+ degrees of steering lock, you can still run an OEM style swaybar and a lock stop has been incorporated into the design.

These lower arms are based off CMM data, are CAD designed, FEA tested, have CNC machined ends and the main body is laser cut and CNC machined 16mm thick chromoly steel for maximum strength. To finish the arms off they're E-coated (aka electrophoresis coating) for rust prevention and we're exclusively using Teflon lined bearings with dust covers for increased longevity.

- Direct replacement of the OEM LCA
- Feature 5/8" Teflon lined sphericals (inner) which eliminates the flex found in factory rubber bushing offering a more direct and predictable feel.
- Laser cut and CNC machined from 16mm thick 4130 Chromoly sheet.
- CMM measured, CAD designed, FEA tested and CNC machined.
- Available in 3 different lengths. +0 > +25mm +20 > +45mm or +40 > +65mm (this listing is for +20 > +45mm)

NOTE #1: On an S13 or R32 the length is going to be an additional 9mm in length over the listed lengths. Ie. if you run our shorter LCA's on an S13 the shortest that they can be run is +29mm and the shortest the longer LCA's can be run is +49mm

An OEM style ball joint is to be used, you can either use your original ball joint or purchase new ones which we do sell, please see the following fitment guide:

BJ274, which fits the following vehicles;
- Nissan S13 Silvia
- Nissan 180sx
- Nissan A31 Cefiro

BJ291, which fits the following vehicles;
- Nissan S14 200SX
- Nissan S15 200SX
- Nissan Skyline R32 GTS/GTS-T
- Nissan Skyline R33
- Nissan Skyline R34

The V2 High clearance lower control arms have been designed off OEM and the ball joints we supply, which can be seen above.They are an aftermarket OEM replacement however, we cannot confirm other branded OEM replacement ball joints O.D matches the V2 High clearance LCA's that we sell.