The GKTECH high-performance engine fan has been designed and engineered in-house with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90c to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit 1JZ engines!
- Direct replacement of the standard fan
- Pulls 50% more air than the factory JZ fan
NOTE: We can only confirm fitment on the vehicles listed under the confirmed fitment section below which also, only suits only the 1JZGTE OEM viscous coupling/hub and not the 1JZGE. We cannot confirm fitment to any aftermarket viscous couplings.
NOTE #2: If you are trying to fit this to a different chassis/hub please double check the PCD of 4x148mm and I.D of 164mm is the same before purchasing, even then we cannot completely confirm fitment as there maybe other fitment factors that come into place.
GKTECH
Toyota JZX90/JZX100 1JZ High Performance Engine Fan - 50% more air flow
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.The GKTECH high-performance engine fan has been designed and engineered in-house with the intention of pulling more air than the factory item.
When tested on a dyno the GKTECH high-performance fan took less than half the time to cool down from 90c to operating temperature (good for next time you're on the start line at the track).
Super easy to install, simply remove your factory fan (4 bolts) and install the new fan, it is a direct replacement clutch fan to suit 1JZ engines!
- Direct replacement of the standard fan
- Pulls 50% more air than the factory JZ fan
NOTE: We can only confirm fitment on the vehicles listed under the confirmed fitment section below which also, only suits only the 1JZGTE OEM viscous coupling/hub and not the 1JZGE. We cannot confirm fitment to any aftermarket viscous couplings.
NOTE #2: If you are trying to fit this to a different chassis/hub please double check the PCD of 4x148mm and I.D of 164mm is the same before purchasing, even then we cannot completely confirm fitment as there maybe other fitment factors that come into place.
Choose options
FAQs
Will this fit my car?We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
Do you make these to suit other cars?
We only sell the parts listed on our website. If it's not listed on our website, then we don't sell it. Sorry.
What's the advantage of using the GKTech engine fan?
We tested the clutch fan on a test vehicle in a controlled environment (on a dyno) with back to back tests and from 194f/90c, it took less than half the time to go from 194f to idle operating temperature. We found the fan pulls 50% more air than the factory JZ fan.
What modifications are required, is this hard to fit?
No modifications are required, simply just remove and refit.
Is there anything else needed for installation?
You will need to supply your own clutch pack.
Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge it is straightforward. Installation should take around 45 minutes. However, being a vital engine component we recommend only a trained professional to install this product.
How do clutch fans compare to thermo fans?
If you've ever been to the track with thermo fans you know that unless setup with a shroud and correctly, they're useless. Clutch fans with the standard shroud are the way to go.
What is the clutch fan made of?
The clutch fan has a metal center (like the factory unit) and is made of ABS plastic (like the factory unit).
Will I lose any engine power with the fan pulling more air?
No, with our dyno tests on the same car within 30 minutes of each test with multiple runs made we actually GAINED around 1% in power with the new clutch fan installed. The cause of this? There was less heat soak and everything was running cooler.
Which way do I install it?
The fins on the fan are to taper back towards the engine.
VEHICLE COMPATIBILITY
Toyota
JZX100JZX90
USER GUIDE(S)
Install Videos
Goes with your build
Picked just for you 😘
