Z33 350z (HR)/Z34 370z speed sensitive delete fitting

When racing or drifting a late model Z33 350Z (HR) or a Z34 370z the steering at speed gets harder due to the factory speed sensitive steering solenoid.

To overcome this we have made a custom stainless steel 316 fitting that simply and very easily replaces the factory solenoid with no negative effect. 

- DIY install in 5 minutes with the car on a hoist.
- CNC machined from SS316
- No permanent modifications required

NOTE: Early Z33 350z's do NOT have speed sensitive steering

NOTE #2: On the 350z's tool access is quite good. On the 370z it is not which is why we give the option for you to purchase a tool to make removal of the factory solenoid easier. The alternative is to shave an old spanner down to around 5mm in thickness. We can only confirm tool fitment on solenoids that look like the one in our product photos.

Does installing this kit require a wheel alignment?
No, the solenoid is on the steering rack itself. It doesn't change your alignment.

Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.

Is there anything else needed for installation?
There is not.

Can I install this myself? If so how long will installation take?
Yes, provided you have general mechanical knowledge as they are relitively straightforward. Installation time should be around 5 minutes with the car on a hoist. You just need to unscrew the factory solenoid, unplug the solenoid and screw the new fitting in.