GKTECH
S/R chassis (RWD) Front LCA weld in reinforcement plates
OEM Length or extended?:OEM Length
Quantity:
What is a Backorder?
Q: What is backorder?
When a product is on backorder, it means that we have sold out and we are opening a back order due to popular demand. This is essentially a queue, when new stock arrives from production, we’ll send your order.Q: Will items in my order that are in stock be shipped out first?
We will send your order altogether once your backorder item is ready! You may wish to place separate orders if you want an item before the other is due back in stock.Pickup available at Sunshine West, VIC 3020
Usually ready in 2 hours
S/R chassis (RWD) Front LCA weld in reinforcement plates
OEM Length
Sunshine West, VIC 3020
Pickup available, usually ready in 2 hours
11/94 Boundary Road
Sunshine West VIC 3020
Australia
📦
Free Shipping on orders over $200
Checking Dispatch Times...The GKTECH S/R Chassis (RWD) front LCA weld in reinforcement plates have been designed from a 3D scan with the addition of CMM data to help to reinforce your subframe where it needs it most.
Laser cut, steel, and dimple died for strength these plates make reinforcement of the front LCA's a heap easier than attempting to do it yourself.
- Available in OEM length, +20mm, +30mm and +40mm
Will this fit my car?
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
Do you make these to suit other cars?
We do. We make a range of these. Please check our website for alternate versions.
What's the advantage of using the GKTech weld in kit?
Strength. The OEM LCA's are not strong by any means. They flex quite a lot and by boxing these in the ridgidity increases exponentially.
What modifications are required, is this hard to fit?
The OEM length weld in plate is quite easy to weld in but the extended variants do also require cutting and the use of our template to cut correctly.
Is there anything else needed for installation?
You will need a welder. In terms of the kit, it will arrive as shown in the product photo.
Can I install this myself? If so how long will installation take?
Yes, provided you have welding experience. Welding in of the kit should take around 30 minutes.
We can only confirm fitment for the vehicles listed above under "vehicle compatibility". If your car is not listed there, then we don't know if it will fit.
Do you make these to suit other cars?
We do. We make a range of these. Please check our website for alternate versions.
What's the advantage of using the GKTech weld in kit?
Strength. The OEM LCA's are not strong by any means. They flex quite a lot and by boxing these in the ridgidity increases exponentially.
What modifications are required, is this hard to fit?
The OEM length weld in plate is quite easy to weld in but the extended variants do also require cutting and the use of our template to cut correctly.
Is there anything else needed for installation?
You will need a welder. In terms of the kit, it will arrive as shown in the product photo.
Can I install this myself? If so how long will installation take?
Yes, provided you have welding experience. Welding in of the kit should take around 30 minutes.
Nissan
C33 Laurel
CEFIRO A31
R32 SKYLINE GTS-T
R33 SKYLINE GTS-T
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
C33 Laurel
CEFIRO A31
R32 SKYLINE GTS-T
R33 SKYLINE GTS-T
S13 CA18 180SX
S13 CA18 SILVIA
S13 SR20 180SX
S13 SR20 SILVIA
S14 200SX/SILVIA
S15 200SX/SILVIA
